JC100 SERIES JC200 SERIES GW-G SERIES VQ-D  SERIES
JX SERIES DS SERIES JM SERIES VQ-G SERIES
  JZ SERIES JT SERIES EM SERIES JSP SERIES
  SVQ SERIES JCF SERIES    

 

JCOLOR® JM SERIES
WATER SOLUBLE FLUORESCENT TONERS
Chartreuse, Green, Orange-Yellow, Orange, Orange-Red, Red, Cerise, Pink, Magenta, Blue

TARGETED APPLICATIONS

Water-based flexographic and gravure inks; Highlighter inks for felt tip markers

SUMMARY OF PROPERTIES

Thermoplastic, dry granular powders, formaldehyde-free
Water-soluble (with small amount of ammonia and alcohol),
Excellent film forming properties with high color strength and high gloss.
Superior lightfastnes comparing to most solvent-based counterparts,
Excellent transparency  

STORAGE  In a sealed container, away from heat, humidity, and direct sunlight. Otherwise, tend to solidify and form lumps, which, upon crashing and milling, can also be used.  

TOXICITY  Formaldehyde-free; complies with currently available international standards on heavy metal concentrations. MSDS available upon request.  

 

Typical 30% Solids JM Ink Formula (by weight)

 

Typical JM Water Based Felt Tip Marker Ink

Water

25

 

JM Ink (30% solid)

40

Isopropanol

16

 

Ethylene Glycol or PEG 200

30

Ammonium Hydroxide (9%)

4

 

Water

30

JM Toner (Dry)

30

 

Total

100

Water

25

 

 

Mix well and adjust solvents to the desired rate of drying

 

Total

100

 

 

RECOMMENDED PROCEDURE FOR PREPARING 30% JM INK

In covered container, prepare pre-mixture of water (100g), isopropanol (64g) and ammonium hydroxide (9%, 16g). An equivalent amount of amines such as triethanolamine and aminomethylpropanol may be substituted for ammonia.

Prepare 40% solids ink concentrate at room temperature by slowly adding 120g JM to above pre-mixture systems at high mixing speed and mixing for 15 - 20 minutes until a clear solution is obtained. Apply additional Ammonium Hydroxide (9%) if the solution remains cloudy. Ensure that pH is between 6.8 - 7.0, or color shift or an unstable solution may result.

Finish JM ink by addition of approximately 100g water bringing the total to 400g to produce a 30% solids ink. It is recommended that JM ink be prepared for immediate use.

 

 

Disclaimer:  The information hereon has been compiled from sources which we believe to be reliable, but we assume no responsibility or liability for its accuracy or for the result of any application made of any information contained herein, nor do we assume any liability for infringement of any patent which may result from the application of such information.




















































 

 

 

 

 

 

 








Copyright © 2001 by J COLOR CHEMICALS. ALL RIGHTS RESERVED