JC100 SERIES JC200 SERIES GW-G SERIES VQ-D  SERIES
JX SERIES DS SERIES JM SERIES VQ-G SERIES
  JZ SERIES JT SERIES EM SERIES JSP SERIES
  SVQ SERIES JCF SERIES    

 


PRODUCT:

JCOLOR® JT-SERIES 
Thermoset Fluorescent Pigments

 

Comprising:

Chartreuse, Green, Orange-Yellow, Orange, Orange-Red, Red, Cerise, Pink, Magenta, Blue

 

Chemical nature:

A solid solution of fluorescent dyes in a thermoset amino resin

 

Highlight of Properties:

Thermoset, narrow distributed particles; Excellent resistance to solvent and bleed; Good tinting strength, and broad compatibility.

Recommended Applicatoins:

Coatings and Inks where strong solvent are applied; other solvent sensitive systems

 

Physical properties:

Shape and state:

Solid irregular shaped particles

 

pH:

3.8~ 6 (5% dispersion in water)

 

*Moisture*:

< 4% (2 gram under 140C for 0.5 hours)

 

Specific Gravity:

1.3 (20C)

 

Solvent Resistance:

Not soluble in most solvent systems and water. (Solubility is tested in a 40C water bath for 30 minutes. Following the solubility test, appearance of the supernatant is observed and marked for bleed scales.)

 

Bleed Resistance:

Solvent

Acetone, Methanol,  Methyl Ethyl Ketone

Ethanol, 2-Propanol

Ethyl Acetate

Mineral Spirits, Toluene, Xylene

Bleed

1- 2

1

1 - 2

0

Bleed scales:  0 – negligible;  1 – slight;  2 – moderate; 3 – considerable

 

*Particle Size* (Microscope):

Maximum 10 mm

 

*Particle Size*

Average <5 mm

 

Softening Point:

110~160C

 

Decomposition Point:

> 300C

 

*Color assessment*:

Shade (hue) and strength are compared against an approved standard by trained technicians upon preparing side-by-side drawdowns and placed in standard light box equipped with UV and D65 light source.

 

Storage: 

Under conditions that are cool, dry, covered, away from direct sunlight and free of airborne contaminates, JT pigments have an indefinite shelf life. 

 

Toxicity:

 

Tests conducted through independent laboratories have found JCOLOR® JT-Series Fluorescent Pigments to be "essentially non-toxic."  MSDS is available upon request. Good industrial hygiene and handling methods are essential in the use of all products whether or not they are determined to be hazardous.

Note:

Items marked with * are standard QC items taken on batch bases.

 

 

Disclaimer:  The information hereon has been compiled from sources which we believe to be reliable, but we assume no responsibility or liability for its accuracy or for the result of any application made of any information contained herein, nor do we assume any liability for infringement of any patent which may result from the application of such information.

 



















































 

 

 

 

 

 

 








Copyright © 2001 by J COLOR CHEMICALS. ALL RIGHTS RESERVED